Why Install A Heat Pump?
This article was written at a time when electricity rates in BC were competitive. They no longer are. (March 2018). AC units make more sense than heat pumps now. Use your AC unit for cooling, natural gas furnace for heating.
However, natural gas is now frowned upon in the zero emissions world and may be phased out in BC, starting in the city of Vancouver and moving outwards from there. Building codes are moving towards uber insulated and airtight buildings with solar and electric heat. We’ll have to wait and see what evolves going forward
If you’re considering having an AC system installed, make sure to consult an electrician to determine if you’ll be exceeding your electrical service size. Its a quick calculation we can typically do over the phone. Call 604-463-6695 for more information
For climates with moderate heating and cooling needs, such as British Columbia, heat pumps can be a cost effective alternative to furnaces and air conditioners. More often they’re used as a supplement to a gas furnace. Because a heat pump will generally reduce energy use there are significant rebates offered by both the Federal and Provincial governments totalling $800-$2000 depending on your existing system. This is as of October, 2013. The rebates change frequently, your heat pump installer will be up to date on the current rebates offered if you decide to upgrade your system. With electricity rates increasing (Spring 2015) you may want to set your heat pump to “EM heat”. Gas only is used for heating, use your heat pump for air conditioning in the summer
Heat pumps are often misunderstood or not understood at all. Because of this, you may not realize that there may be a better heating and cooling option than a furnace or air conditioner. A heat pump is an efficient method of cooling your home in the summer and warming it in the winter.
Although heat pumps are new to many people, they have been around for over three decades. Although its name is a little misleading, a heat pump is an efficient method of heating a home during the cold winter months and also cooling it during the hot summer months. Like your refrigerator, heat pumps use electricity to power a compressor which compresses a refrigerant gas. This process produces both heating and cooling. A heat pump looks like an air conditioner, but that’s only the outside appearance. It actually has two functions based on the same principles for both. In warm weather situations, the heat pump works as a normal air conditioner. It extracts heat from inside the home and transfers it to the outdoor air.
In colder weather, however, the process reverses, collecting heat from the outdoor air and transferring it inside your home. Even when the air outside feels extremely cold, the air still contains some heat. The heat pump pulls the heat from this cold outdoor air and sends it inside to warm your home. While many people find the winter operation of a heat pump the most difficult to understand, it is during the heating cycle that the heat pump produces the most savings. Unlike a furnace that turns fossil fuel or electricity into heat, the heat pump collects heat that already exists in the outdoor air by means of its refrigeration cycle. Consequently, a heat pump will produce up to four times more heat than the energy it uses.
In addition, a heat pump can be an effective add-on option to use in conjunction with an existing gas furnace. Heating/Cooling coils are installed at the furnace output ducting. Usually a variable speed motor is installed as well. With a dual-fuel system, the two systems share the heating load but never function at the same time. Each system operates when it is most cost effective. The heat pump will be the primary heating and cooling system. However, when the temperature drops below the heat pump’s ability to operate as efficiently as the gas furnace, the gas furnace will take over until the temperature rises enough for the heat pump to operate more efficiently.
For homes without ducts, air-source heat pumps are also available in a ductless version called a mini-split heat pump. In addition, a special type of air-source heat pump called a “reverse cycle chiller” generates hot and cold water rather than air, allowing it to be used with radiant floor heating systems in heating mode.
Higher efficiencies are achieved with geothermal (ground-source or water-source) heat pumps, which transfer heat between your house and the ground or a nearby water source. Although they cost more to install, geothermal heat pumps have low operating costs because they take advantage of relatively constant ground or water temperatures. However, the installation depends on the size of your lot, the subsoil and landscape. Ground-source or water-source heat pumps can be used in more extreme climatic conditions than air-source heat pumps.
For more information about heat pumps visit our website at http://www.pacificstarelectric.ca/
Electrical contractor serving the Lower Mainland of BC including Abbotsford, Agassiz, Aldergrove, Anmore, Belcarra, Burnaby, Chilliwack, Coquitlam, Delta, Hope, Langley, Maple Ridge, Mission, New Westminster, North Vancouver, Pitt Meadows, Port Coquitlam, Port Moody, Richmond, Squamish, Surrey, Vancouver, West Vancouver, Whistler & White Rock. Also serving the Cariboo region.
Pacific Star Electric
22323 Dewdney Trunk Rd.
Maple Ridge, BC Canada